The SMOK V8 Baby RBA Deck is a rebuildable atomiser head, that fits SMOK TFV8 Baby. The V8 Baby RBA Deck features dual posts with four post rebuildable deck and bottom feeding system. The SMOK V8 Baby RBA Deck (Rebuildable Atomiser Head) is ideal for vapers who want the freedom to build and rewick their own atomiser heads.
With the SMOK V8 Baby RBA Deck you can customise your SMOK Baby tank to deliver the ultimate vape. The kit comes pre-fitted with dual fused Clapton coils. This is a 0.35 Ohm set-up that’s officially rated to vape between 30 and 60 Watts. It’s a great starter build but obviously you have the freedom to purchase pre-made cols or wind your own.
Using the SMOK V8 Baby RBA Deck
Inside the V8 Baby RBA kit box you’ll find a V8 Baby RBA deck, an extended Pyrex glass tube and an Allen key, along with replacement screws and seals. The kit doesn’t come with any cotton, so you’ll need to order that separately.
To access the core of the V8 Baby RBA Deck you need to unscrew the stainless steel coil housing. The threads are smooth and slick so it’s an easy operation. The Baby RBA has a two-post deck with a diameter of about 18mm. As the pre-built deck demonstrates – there’s more than enough room for two spaced Clapton coils, or any other dual coil build that you’d like to try. Each post is drilled with two terminal holes. The coil wires are fixed in the holes using hex-head, Allen screws – far superior to the tiny flat-head screws that you often find on small RBA’s.
Wicking is fairly standard for this type of RBA. Just feed a plumped-up length of cotton through the centre of each coil, then trim the ends. You need to leave enough cotton to feed down into the RBA’s e-liquid well. At this point you need to check that the coil housing still fits nicely without shorting out a coil. If everything is in order, you can prime the wicks with a little e-liquid, then screw the TFV8 Baby RBA Deck in to your tank.
SMOK V8 Baby RBA Deck – Contents
- 1 x SMOK V8 Baby RBA Deck (Rebuildable Atomiser Head)
- 2 x Fused Clapton Coils 0.35 Ohms (Pre-Fitted)
- 1 x V8 Baby RBA extended pyrex glass tube
- 1 x Cross screwdriver
- 4 x Replacement screws
- 2 x Sealing rings
SMOK V8 Baby RBA Deck – Features & Specifications
- 18mm diameter two post build deck
- Deck features a ‘juice well’ design
- Requires a dual coil build
- Pre-fitted with a dual Clapton 0.35 Ohm set-up
- Cotton wicks required (not supplied)
- Large terminal holes for fat coil wire
- Hex-headed Allen screws to secure coil wire
- Allen key included
- Spare O rings & screws included
- Exceptional cloud production
- Superb e-liquid flavour
- More economical than buying replacement coils
- 100% Genuine SMOK product